Starter Kits#
NewAE offers several starter packs to make getting into side channel attacks easier. One of these (the ChipSHOUTER) fall under the ChipSHOUTER branch of products, while the others fall under the ChipWhisperer branch of products.
The following table is a quick comparison between the different ChipWhisperer starter kits.
Note that the ChipWhisperer Pro and its starter kit are both discontinued; it is listed here only for comparison purposes.
Starter Kit |
Capture-Device |
Targets |
Single Board |
Cost (USD) |
|---|---|---|---|---|
ChipWhisperer-Nano |
ChipWhisperer-Nano |
STM32F0 |
Yes |
$60 |
ChipWhisperer-Lite |
ChipWhisperer-Lite |
XMEGA or STM32F3 (CW303) or None |
Yes (1-part), No (2-part) |
$368-481 |
SCAPACK-L1 |
Chipwhisperer-Lite |
CW308, CW308T-XMEGA, CW308T-STM32F3, CW308T-STM32F0 |
No |
$850 |
SCAPACK-L2 |
ChipWhisperer-Lite |
CW308, CW308T-XMEGA, CW308T-STM32F3, CW308T-STM32F0 |
No |
$1400 |
Husky |
ChipWhisperer-Husky |
CW313, CW312T-SAM4S, CW312T-iCE40 |
No |
$643 |
Husky-Plus |
ChipWhisperer-Husky-Plus |
CW313, CW312T-SAM4S, CW312T-iCE40 |
No |
$1115 |
|
|
|
No |
discontinued |
The starter kits also come with the following hardware/tools:
Starter Kit |
Additional Hardware |
|---|---|
ChipWhisperer-Nano |
micro-usb cable |
ChipWhisperer-Lite |
micro-usb cable, 20-pin connector and coax cables (2-part only) |
SCAPACK-L1 |
micro-usb cable, CW308T Generic PCB, CW308T-STM32F blank PCB, 2x Lifter tool to remove targets, SMA Tee adapter, SMA Cables, SMA to BNC Cable |
SCAPACK-L2 |
micro-usb cable, CW308T Generic PCB, CW308T-STM32F blank PCB, 2x Lifter tool to remove targets, SMA Tee adapter, SMA Cables, SMA to BNC Cable, H-Field Probe, Differential Probe, Probe power supply (DC-DC), 5V wall adapter for probe/CW308 power |
Husky |
SMA Cables (×2), ChipWhisperer 20-Pin Connector breakout wires, MCX to SMA & MCX to BNC, 20-Pin Cables (×2), USB-C Cable (with USB-A adapter), Jumper Wires & Caps, CW308 Target to CW312 adapter |
Husky-Plus |
SMA Cables (×2), ChipWhisperer 20-Pin Connector breakout wires, MCX to SMA & MCX to BNC, 20-Pin Cables (×2), USB-C Cable (with USB-A adapter), Jumper Wires & Caps, CW308 Target to CW312 adapter |
|
|
The ChipSHOUTER starter kit comes with the ChipSHOUTER, as well as 2 EMFI targets and a bunch of cabling/converters for attaching to different lab equipment.